Products – OLD

Features:

• Spinnerets
• Rinse baths
• Godets
• Dryers
• Texturizers
• Winders
• Lab lines
• Production lines
• Potting centrifuges
• Blending kettles
• Extruders
• DC servo controls on number of wraps, number of bundles, width of bundles
• Designed for cost effectiveness and space constraints

Features:

• Powered Unwind
• Powered Rewind
• Capstan Pull Roll Modules
• Load Cell Tension Controls
• Polybond Spreader Roll
• Accommodates any width
• Remote Motors & Gearboxes to Prevent Contamination
• Modular Design

Produces liquid filtration tests (for in-home pregnancy tests, etc.) by coating material in test solutions, drying and slitting it to the required width and rewinding it.

Features:

• Precise dispensing via IVEK ceramic pumps
• Tension controlled accumulators allow for changeover without line stoppage
• Splice detector and reagent marker for downstream detection
• Manual splice station
• Drying tunnel
• Rewind capabilities
• Cheek plate design

Benefits:

• All processes completed in-line
• User-set speed and tension controls allow flexibility for various product requirements

Produces cartridge bundles used in medical filtration applications.

Features:

• Load station for plastic cores
• Tape location sensing station for automatic doffing
• Winding station and Unload station
• PC-recorded process information on each bundle
• Class 10,000 clean room environment compatible
• Bundle diameter measured by laser

Benefits:

• Critical material tension is monitored and PC-controlled through use of load cells and particle brakes
• Automatic operator prompts ensure tight process control

With the introduction of the Opti-Pak™ 1000, Chase Machine ushers in a new era in downstream process efficiency. The machine’s innovative materials-packaging method -based on layering rather than roll forming – dramatically improves material handling and performance on high-speed continuous converting processes.

By eliminating twists, tangles and tension – while distributing material evenly into boxes -the Opti-Pak 1000 yields increased productivity while substantially reducing production costs.

Features:

• Packing speeds up to 750′ per minute
  (based on specific product and packaging needs)
• Variable fold lengths and pitch
• Box or pallet sizes up to 42″ deep by 48″ wide by 42″ high
• Counter weighted, interlocked front and rear doors
• Pneumatic Material Tampering
• Optional Auto Box Doffing

Benefits:

• Allows for long, uninterrupted runs without time-consuming roll changeovers
• Eliminates the need for costly flying-splice equipment and accumulators
• Increases production running time and performance
• Improves packaging stability when shipping or storing
• Results in reduced use of warehouse space
• Reduces the risk of splice failures

Chase Machine’s new Opti-Pak™ 2000 is designed to give delicate and high-loft materials the special handling they deserve. The product of market-leading Chase technology, the Opti-Pak 2000 enables you to move material directly from upstream slitting, laminating or packaging to a layered box or pallet – in one continuous motion.

The Opti-Pak 2000 represents a critical leap forward in material handling technology for high-speed continuous converting processes, delivering a consistent, square package with no twists, no tangles, and no tension.

Features:

• Packing speeds up to 600 feet per minute
  (depending upon product and feeding equipment capabilities)
• Maintains uniform tension as product is delivered and stored
• Streamlines materials handling upstream and downstream

Benefits:

• Offers continuous productivity & higher production throughput
• Eliminates expensive flying splice equipment
• Reduces need for warehouse space

For Traverse Winding Web, Tape, Ribbon, Film, Foil, Braid, Cord, etc.

Features:

• ½ H.P. D.C. drive, 110 volt with foot control
• Variable speed with dynamic braking
• Traverse length and lay easily adjusted with hand knobs
• Measuring unit in yards and tenths

Options:

• Single or multiple packages
• Predetermined counter
• Interchangeable spindles
• Traverse width – minimum 3″ – maximum 12″

Features:

• ½ H.P. D.C. motor with dynamic braking
• Variable speed with panel and foot pedal control
• Interchangeable pilot for various core sizes
• Simple lever action to remove block

Options:

• Predetermined counter
• Let off stand for rewind
• Air cylinder on tailstock

Ultrasonic Rotary Drum Bonder-Laminators are able to fuse multiple layers of most man-made fibers in a variety of patterns for use in such products as medical clean room wipes, face masks, incontinence products, filtration media, mattress pads, quilts and window fashions. The Rotary Drum equipment fuses the molecules of dissimilar or like material layers by emitting high-frequency sound waves: resulting bonds are permanent and can be positioned precisely, even creating patterns if desired. The particular benefits of ultrasonic bonding are: no preheat time, absolute on/off, and the cleanliness of the operation.

Features: (download a PDF)

• Two DC drives
• Auto or manual operation
• Complete pneumatic system
• Actuator mounting for single or multiples
• A four position unwind
• Electronic guidance system
• Digital speed readout
• Electronic/pneumatic brake
• Easy accessible pin roll
• Rewind station

Laminating Module Includes:

• 3-Position Unwind
• Electronic edge guidance
• Dancer controlled tension
• Independent Modular Design
• (6) Ultrasonic Units
• Spreader Rolls
• 4% Embossing Pattern (other patterns available)
• Wider widths may be accommodated
• Speeds dependent upon materials being laminated

Slitting Module Includes:

• Rotating Slitting Anvil
• Spreader Rolls
• Minimum slit width: 2″
• Dual Position Rewind

Features: (download a pdf)

• Stand-alone system enables flexibility and tight turns in sealing and/or cutting, and provides unobstructed view of fabric in the processing area
• Two-position foot switch facilitates operation – first position raises and engages the rotary wheel, applying force to the material being processed; second position activates ultrasonics and wheel rotation
• Operator-selectable maximum operator speed enables operator to set maximum feed speed at the fully depressed foot switch position setting
• Designed for operator safety – no needles or other moving parts above the work surface
• Variable speed drive motor provides continuous operation at speed ranges of 0 to 60 ft/min and 7 to 123 ft/min
• Operator controls conveniently located on control panel, including pneumatic pressure regulator; on/off switch; power on indicator; and nip control
• Various sealing patterns available, including standard single stitch, right or left slant, and zigzag; custom-designed patterns also available at additional fee
• Typical applications include protective garments, disposable hospital gowns and shoe covers, face masks, infants’ nursery garments, filters, bags, curtains, sails, and web splicing

Features: (download a PDF)

• Seals knitted, woven and non-woven thermoplastic materials without needle or thread
• Standard model operates at speeds up to 30 feet per minute
• Interchangeable pattern wheels – right or left slant, zigzag, single stitch
• Branson Ultrasonic 910BC ultrasonic power supply